| | |  | Search by Manufacturer | Home » » Bench Dog 10-005 Feather-Loc Single Featherboard for Table Saws and Router Tables | | | | | | | Description: | | This premium featherboard holds stock firmly against your power tool's fence or tabletop for safer, more comfortable cutting. Use it on the table saw to keep long stock tight against the rip fence, or attach it to your fence to prevent workpieces from lifting during a cut. From routers to shapers to bandsaws, Feather-Loc works great to stabilize pieces on a variety of tools. It features integral fittings for T-slots and includes a miter-slot adapter for tables and fences with standard 3/8" x 3/4" slots. | | | Features: | |
• Multipurpose featherboard for holding the stock against the guide fence
• Unique miter gauge slot allows quick removal
• Easy set-up feature
• High tech polymer ensures it will maintain its original shape
• Advanced design means no marring to your workpiece
| | | Product Details: | | | Product Length:
| 17.5 inches | | Product Width:
| 10.5 inches | | Product Height:
| 18.0 inches | | Product Weight:
| 1.0 pounds | | Package Length:
| 8.8 inches | | Package Width:
| 7.1 inches | | Package Height:
| 1.8 inches | | Package Weight:
| 1.1 pounds | | Average Customer Rating:
|  based on 30 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 30 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
42 of 43 found the following review helpful:
 Better than home made featherboardsMar 13, 2003
By Bob Feeser
"MillCrafters.com"
We all know that home made featherboards are makable. The problem is the way to clamp them down. Normally you are using clamps that are far reaching for a table top, or over the top of the fence, which may get in the way of your workpiece.
With the Blade Loc featherboards, they use the existing mitre slot of your table saw or router table (3/4" approx) for their grip. They have a tapered cut on a built in metal mitre track (that you can not see from the photograph) that the nut underneath mushrooms out, squeezing it against your mitre track.
Since those locking T-handles that you see are installed along a sliding groove (that you can see) you are able to slide-adjust the featherboard to meet with your workpiece. No far reaching clamps to deal with.
The feathering action is nice. They give in such a way as to make the grip as gentle or as tough as you want it. I find that with home made featherboards, that aspect is harder to control. If you cut the tongues too wide, or too thin, they can break. With the Bench Dog, they are more durable, never break, and are fully adjustable to the tension you want.
You can buy the mitre slot adapter, or style which is what I am talking about in this review. They also come with a T-nut style so you can use them in a track. That is simply a nut underneath that rides in your T-style track. They work even better than the mitre track method, which depending on your mitre track on your saw, may or may not grip as tightly as you would like, if it has even the slightest bit of oil, or waxy residue on the surface.
I must say that with either method, all in all a great piece of equipment. Handy, universal, and inexpensive considering how often you may get to use it.
31 of 31 found the following review helpful:
versatileJan 01, 2001
By h. david melfi
I recently had to borrow a feather board from a friend. I had broken a home made one. So I did and found it be totally versatile easy to use and take off. It also felt very comfortable in many different positions. Changing angles quickly and it also was very accurate, no hangups. The material also allows the wood to pass through without binding. So I automatically went to the amazon.com web site found it and ordered it, along with the bench dog blade lock easy blade change is a must to keep your blades and cuts accurate. I'm waiting anxiously. THANK YOU IFLEM-INC.
25 of 26 found the following review helpful:
 Good idea, poor design and constructionFeb 04, 2006
By Darryl Ramm
I purchased about five of these for use on different tools. Initially they looked good, but in use they are annoying and end up breaking. Most other commercially available featherboards for table saws are better designed, better built and cost less! I am surprised other reviewers rate these so high, I suspect the ratings are given before much use.
1. The black plastic knobs that you use to tighten the featherboard in place capture onto a nut head. The largest problem with these featherboards is that it is easy to strip the black plastic knobs when they are tightened, allowing the plastic knob to turn freely on the captive bolt.
2. A better design would ensure a more positive capture into the miter track by having both black knobs works to lock the split aluminum bar into the miter slot, in this design only one of the knobs does this. Which BTW is the one that strips as above, since you have to tighten it enough to stop the featherboard sliding in the miter track.
3. The black plastic knobs are small and feel cheap, other commercial featherboards have larger knobs that are easier to tighten.
4. Also after using them for a while you've start to hate the non-parallel bolt slots that the featherboard slides around on. Most other commercial featherboards have parallel slots and these are easier to adjust.
Amazon has wooden featherboards and the Grip-tite model available, both are much better than these. Also Rockler makes a good $7 table saw featherboard that is a much better product.
13 of 13 found the following review helpful:
Lock and HoldJul 31, 2002
By C. Langston
"calangst"
I've been using this featherboard for several months now on my table saw. It is another excellently designed Benchdog product. The miter bar included with this model enables it to firmly lock into the miter slots of the table saw and yet be moved quickly and easily for other set ups. Its features include a special short finger among the plastic "feathers" that enables you to correctly tension the featherboard against the workpiece. I just wish that Amazon had the package that has the two featherboards without the miter bar for use on my router fence.
12 of 12 found the following review helpful:
It Works!Nov 06, 2002
By Gregory S Brown
Either these fingerboards work well or they don't. This one does. Good quality all around. The short "starting" finger is a nice idea. It's also plenty big to fit just about any need. It's pricy but I would buy again.
See all 30 customer reviews on Amazon.com
| | |
|
