| | |  | Search by Manufacturer | Home » » Bench Dog 40-120 ProPlate Standard Group1 | | | | | | | Description: | | These 1/4" thick aluminum plates all measure 8-1/4" x 11-3/4" - the exact size of the plate opening in Bench Dog's new ProTop and ProMaxRT router tables. Each plate has a different mounting-hole configuration so that virtually every router on the market will fit one of the four pre-drilled options. The most popular routers on the market have been divided into Groups, with a plate assigned to each Group.
Locate your router in one of the groups below and compare with the offer title above. If your router in not listed, we suggest either of Bench Dog's two blank-plate options to fit your router. All plates include an insert with a 1-1/2" bit opening. Optional inserts sold separately.
Group A Routers, with 3-1/4" Plate Opening:
Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch 1617-
1618; Rigid 2930 Combo Kit; Porter Cable 690, 890, 7529, 97529, 8529;
Hitachi M12VC (Fixed & Kit).
Group B Routers, with 3-1/4" Plate Opening:
DeWalt DW621, DW621k; Crafstman Standard; Freud FT1700E.
1702VCEK
Group C Routers, with 3-11/16" Plate Opening:
Porter-Cable 7518,7519, 7538, & 7539; Milwaukee 5625-20; Triton
TRA001 and MOF001
Group D Routers, with 3-11/16" Plate Opening:
Bosch 1619-1619EVS, Freud FT2000; DeWalt 625
Blanks Plate Options
Standard Blank Plate, with 3-1/4" Plate Opening:
Large Blank Plate, with 3-11/16" Plate Opening:
All Bench Dog aluminum router plates are a full 8-1/4" x 11-3/4" x 1/4" - the perfect size for any router and all of our new tables! Every heavy-duty aluminum plate includes an insert with a 1-1/2" bit opening, plate-locking bolts for our new leveling and locking system (Shown at right), and router-mounting hardware. | | | Features: | |
• 8-1/4-Inch by 11-3/4-Inch by 1/4-Inch
• Sized to fit all bench dog router tables.
• Precision-machined on CNC mills and hard coat anodized for extreme wear resistance.
• Includes the necessary mounting hardware, a fulcrum pin and 1-1/2-Inch insert to handle most routing applications.
| | | Product Details: | | | Package Length:
| 13.5 inches | | Package Width:
| 8.4 inches | | Package Height:
| 0.9 inches | | Package Weight:
| 2.6 pounds | | Average Customer Rating:
|  based on 9 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 9 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
8 of 8 found the following review helpful:
 Poor qualityJan 09, 2009
By R. Mikesell
I bought the first one and tried to mount it on the bench. I could get the corners flush, but the center was high (there was a bow in it). I sent it back and ordered a new one. Same thing. I may just go to a metal shop and have one made.
9 of 10 found the following review helpful:
router plateApr 08, 2010
By t zup
Plate is made well as far as materials go. The problem lies in the lack of instructions and installation guides. I contacted bench dog & they said they are working on this issue. I had to custom make jack bolts to align this to a workable height. Took 2-1/2 hours to set. Although they show my router fitting this plate, I had to drill my own hole for the t handle height adjustment. They also said they are working on this misinformation as well.
(You must also buy the center section seperate). The write up is also not too clear on this and I found out after.
If you are handy & capable of customizing, then buy this.
If not, stay away from this.
5 of 5 found the following review helpful:
Not flateJun 02, 2010
By T. Le
Similar problem with another with regards to plate flatness. Thus, I have to spend a lot of time adjusting the level screws to get it "near" flat. The insert was also not flush. So I had to send that down.
Everything else is basic, nothing special. You have to screw in the inserts (vs drop in and lock). Flatness is pretty fundamental, thus I have it give it 1 star.
I've used the plate on the cast iron extension. Thank goodness, the cast iron is flat.
5 of 5 found the following review helpful:
 well built plateDec 23, 2009
By Edward
"Eddie P"
Well built metal plate. Solid, with holes for specific routers. Instructions lacking, specifically on leveling screws. Took some time to figure out what they meant. A suggestion would be to have an insert that would cover the open hole entirely when I use my table saw mounted router table as a table saw extension only
4 of 4 found the following review helpful:
Great Plate - No InstructionsJun 28, 2010
By Hayward Weaver
This is a great plate it fit right up to my router with out any problems. Installing it into the Bench Dog table top was a little tricky since the plate comes with no installation instructions. If they would include some kind of instructions I would have given it a 5 out of 5 star rating.
See all 9 customer reviews on Amazon.com
| | |
|
