| | |  | 3M | Home » » » Filtrete 9831DC-6 Dust and Pollen Filters, 600 MPR, 16 x 25 x 1, 6-Pack | | | | | | | Description: | | Dust & Pollen Plus, 16' x 25' x 1', Filtrete Filter, Captures Large Allergens Like Mold Spores & Pet Dander, 20 Times More Effective Than Ordinary Fiberglass Filters, Electrostaically Charged Filtrete Fibers Capture More Micro Particles, Meets The Guidelines Of The American Lung Association Health House Program. | | | Features: | |
• Captures large airborne allergens like household dust, pollen and mold spores
• Great for high velocity equipment because it is engineered for high air flow
• Outperforms non-electrostatic filters
• Measures 16 inches by 25 inches by 1 inch
• Comes in a pack of six filters
| | | Product Details: | | | Product Length:
| 25.0 inches | | Product Width:
| 1.0 inches | | Product Height:
| 16.0 inches | | Product Weight:
| 0.4 pounds | | Package Length:
| 25.4 inches | | Package Width:
| 16.5 inches | | Package Height:
| 6.2 inches | | Package Weight:
| 4.55 pounds | | Average Customer Rating:
| based on 53 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
( 53 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
83 of 93 found the following review helpful:
3M Filtrete FiltersMay 06, 2009
By C. Brown Thank you for your inquiry regarding Filtrete(TM) Filters. We appreciate hearing from you.
All our filters will remove particles that measure .3-10 microns.
The media fibers are polypropylene and polyolefin plastic.
Performance, MERV Ratings and pressure drop:
Maximum/Ultimate Allergen 1700
1-10 microns - 93% MERV 12 pressure drop .20
Ultra Allergen 1250
1-10 microns - 90% MERV 11 pressure drop .18
Allergen Reduction 1200
1-10 microns - 85% MERV 11 pressure drop .23
Micro Allergen Extra 1085
1-10 microns - 85% MERV 11 pressure drop .19
Micro Allergen 1000
1-10 microns - 80% MERV 11 pressure drop .21
Micro Particle 700
1-10 microns - 75% MERV 9 pressure drop .18
Dust & Pollen 600
1-10 microns - 70% MERV 8 pressure drop .14
Dust Reduction 300
1-10 microns - 60% MERV 7 pressure drop .15
As clean filters, the product is not restrictive to air flow. Filters will become restrictive if they are not changed when needed. We say filter life is approximately 3 months and this is an approximation. Filter life is actually determined by the user's living conditions and will vary for every user. To determine when the filter needs to be change, we suggest holding it up to the light. When you cannot see light through the filters, it will need to be changed even if it is before 3 months.
If you are concerned about airflow, you might want to use the Dust & Pollen filter which has the lowest pressure drop, and change it more frequently. The capture rate of this filter is also lower.
Additional information is available on our website at [...]
21 of 22 found the following review helpful:
The best filter for heat pumps.Jul 16, 2010
By jegs I was using the red Filtrete 1000 filters and my HVAC tech said those were too restrictive for a heat pump system since a heat pump relies on more airflow to obtain their BTU rating than a conventional furnace system. He recommended I use a cheap pleated filter one step above the worthless fiberglass type filters. Now I believe that a heat pump relies on good air flow but I also know that HVAC techs rely on service calls. They love to come out and clean your system because it is full of dust from a cheap filter and charge you an arm and a leg. Dirty systems are also not covered under warranty so it's a win win for them. I did some research and found that some cheap pleated filters can also be very restrictive. I really wanted to use a good filter like the Filtretes but needed something with more airflow. I saw on the blue 600 Filtrete filters that it said "Best Filtrete filter for high velocity equipment" so I tried one and it is the perfect match between airflow and air cleaning ability. I highly recommend the blue Filtrete 600 for your heat pump system.
50 of 58 found the following review helpful:
Try the Advanced Allergen filter if you have allergies or petsFeb 11, 2008
By Paul Moskowitz My house uses forced air for heating. The disadvantage of such a system is that it distributes the dust in the air everywhere in the house. However, it is supposed to be possible to filter out the dust. Over the years, I have steadily increased the quality of the filter that I use for my forced air heating system. However, until now I have not noticed any obvious difference in my allergic reactions that seem to start with the heating season.
There are two cats in my house. I have read that cat dander, tiny flakes of cat skin shed by the cats, is five times smaller than household dust particles. It stays in the air much longer than ordinary dust before it settles. Because of its small size it requires a more efficient filter to get it out of the air.
Until this year, I have used of variety of filters with mixed results. However, this year, I started using the 3M Advanced Allergen Filters, the ones in the blue wrapper. These have a 3M Microparticle Performance Rating of 1500, but do not have a MERV rating listed. MERV stands for Minimum Efficiency Reporting Value and is a number from 1 to 12, produced from a test designed by the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE). A higher MERV rating indicates better filter performance. 3M uses particle data between 0.3 and 1.0 micron size to calculate a Microparticle Performance Rating or MPR. The higher the MPR, the better the filter. However, higher rated filters cost more.
Here are some of the Filtrete filters offered by 3M: Dust & Pollen Filter, Microparticle Performance Rating 600, MERV rating of 8 Micro Allergen Filter, Microparticle Performance Rating 1000, MERV rating of 11 Ultra Allergen Filter, Microparticle Performance Rating 1250, MERV rating of 11 Advanced Allegen Filter, Microparticle Performance Rating 1500, MERV rating not available
The difference made by the Advanced filter was immediately obvious. My running nose stopped running. I assume that the new Advanced filters must be taking out more of the dust in the air including the cat dander. I have not noticed a change in the speed of the circulated air. The additional cost of the Advanced filter is worth it if you have allergies or pets. However, if you are happy with a lower-rated and lower-cost filter, then you can continue using that one. I suggest that you check Amazon and vendors on the web to get the best price.
9 of 9 found the following review helpful:
Appears to clear the air without over-restricting the air flowMar 24, 2010
By Doug I admittedly did not expect to experience much of a difference in air quality in my home. I was just looking to replace my previous ones with filters that claim to filter well but won't shut down my central air system by over-limiting the air flow (as happened once before with a more dense filter). I've used this one for several months now and have been sniffling 'a whole lot' less. Also, my central air system has not shut down yet (same one in for about 4 months now). Recommended.
8 of 8 found the following review helpful:
Good price, packaging, and performance.May 14, 2011
By S. Power I have been experimenting with different air filters over the last few years to see which level of filtration works the best for us. 600 MPR, like these filters are the best balance between airflow and filtration. Any higher, and you start increasing your energy costs and reducing the airflow of your system. Any lower, and the amount of indoor allergens becomes apparent.
In addition to being the right balance between airflow and effectiveness, the 3M Filtrete 600 MPR filters also are durable and provide a large amount of 'in-filter surface area' to hold the stuff it catches over a long period of time. We have found that these filters will last 2 months in the high use periods and as many as 4 during the spring and fall. They hold a lot of dust before impacting airflow.
The price and convenience of buying these on Amazon.com can't be beat. A 6-pack of these delivered to your doorstep, well packaged for transport and long-term storage, is much better than having to buy them frequently locally. When you do that, they dominate your cart and often get damaged in the process.
I wish I started buying these earlier, and recommend that you learn from my mistake. These are the best price on the best filters.
See all 53 customer reviews on Amazon.com
| | |
|