New and improved! We took our basic combination Metal Lathe/Milling Machine and increased its capacity and usability. Start with a lathe spindle bore of 3/4" and a longer bed. Then add more change gears, inch-cut lead screws, 4" 3-jaw chuck, reversing switch and so much more. This is an excellent machine for anyone, from the beginning machinist to the seasoned machinist. You get a lot of machine in a very small package with all the FEATURES you need for just about any job! FEATURES: ? T-slots in cross slide ? Cuts inch and metric threads ? Turret tool post ? 4" 3-jaw chuck ? Tailstock offsets 1/2" ? Built-in vise SPECIFICATIONS: ? Swing over bed: 16-1/2" ? Swing over saddle: 11-1/2" ? Distance between centers: 19-3/16" ? Spindle taper: MT #3 ? Mill drill spindle taper: MT #3 ? Draw bar: 3/8" - 16 TPI ? Tailstock barrel travel: 1-1/2" ? Cross slide travel: 4-1/2" ? Number of Mill/Drill speeds: 14 ? Speed range: 135, 175, 240, 295, 315, 380, 390, 490, 505, 635, 695, 900, 1055, 1370 RPM ? Number of Lathe speeds: 7 ? Lathe speed range: 185, 330, 405, 535, 680, 955, 1455 RPM ? Range of threads (inches): 8 - 120 TPI in 27 steps (Gear changes required) ? Range of threads (metric): 18 @ 0.2 - 3.0 mm ? Motor size (single phase 110V): 3/4 H.P. ? Shipping weight approximate: 475 lbs. STANDARD Equipment: ? 4" 3-jaw chuck ? 1/2" drill chuck ? MT#3 chuck arbor ? 2 dead centers ? Change gears ? 5" backplate ? 9-1/2" face plate