| | |  | Delta | Home » » » HTC HRD-10X Mobile Base For Delta 10-Inch Contractor Table Saw With 30-Inch Unifence | | | | | | | Description: | | Makes cleanup a breeze--simply move to clean, then re-position! Increase your working space by mounting your machines on HTC mobile machine bases. You immediately gain valuable floor space by effortlessly positioning machine location to suit your needs, or store machines not in use. Most HTC mobile bases have 2 rigid type wheels and 1 swivel wheel arranged to raise your machine by only 3/4 in. off the floor. Standard easy set brake knobs on the 2 rigid wheels provide positive control without use of the controls. All HTC mobile bases are constructed of heavy-gauge steel and are full welded for strength and finished appearance. | | | Features: | |
• 10-inch contractors saw with 30-inch Unifence
• Two rigid wheels, one swivel wheel
• Raises machine 3/4 inch off floor
• Brake knobs to set brake on the two rigid wheels
• Heavy gauge steel, full welded for strength and finished appearance
| | | Product Details: | | | Package Length:
| 51.0 inches | | Package Width:
| 34.5 inches | | Package Height:
| 3.7 inches | | Package Weight:
| 33.2 pounds | | Average Customer Rating:
|  based on 8 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 8 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
22 of 23 found the following review helpful:
 Solidly MobileJul 03, 2000
By Robert Lodi
This base is great. There is zero set-up involved, and it was easy enough to get the saw on the base alone. The saw is as stable on the base when the wheels are locked as it was without the base at all, and it rolls with little effort when you're done. Highly recommended.
7 of 7 found the following review helpful:
A must have...Jan 20, 2003
A must have for the Delta saw with the 30" fence. Particularly in a limited space. Out of the box setup, well built. 3 snaps up!
7 of 7 found the following review helpful:
 It does its job, mostlyOct 26, 2002
By Robert Zimdar
This base does hold the saw and extension table fine. Set up was a snap. My only complaint is the swivel wheel. When locked, it will not roll, but is still can spin! An errant hip check or feed snag can produce a few inches of movement. The brake design of the roller wheels is good. Just make sure the swivel wheel really is secure.
7 of 7 found the following review helpful:
A must-have for large table sawsJun 01, 2002
By S. Thomas Dorey
This base is solid and easily moved. The brakes make it sit still as if it wasn't there. Best way to move a heavy saw. It allows me to roll the saw outside to enjoy the weather or keep it in the shop. Great accessory for my Delta/Beisemeyer saw. Don't go home without it.
1 of 1 found the following review helpful:
 Great If It Fits!May 24, 2007
By Anthony P. James
"honedbone"
This is a well designed and functional piece of equipment, but it doesn't fit the new (or at least not mine) Delta 36-982 contractor's saw. It is too narrow to fit the saw's legs (with or without the pads). BEWARE!
Check with HTC's website for compatibility.
I waited a while to place my saw on the base (had to disassemble it) which was when I discovered the incompatibility. This was also after I had thrown away the packing materials that the base came in.
Amazon was very understanding, given the length of time after I bought the base and the fact that I threw away the packing materials. They were still going to take it back!!
But,have welder, will travel.(I do) If you have a welder and the inclination, it is still a pretty good deal if you can catch it @ 20-25% off.
As much HTC's fault as Amazon's, but Amazon's customer service saved the day (at least mine).
See all 8 customer reviews on Amazon.com
| | |
|
