| | |  | Search by Manufacturer | Home » » HTC TS-9072 Tool Saver 56-by-72-Inch Large Machine Cover | | | | | | | Description: | | Condensation and the rust it brings on are all too often the results of ordinary machine covers. This HTC cover is of a strong, durable cotton sheeting that is skip-coated with a special plastisol. The resulting cover is water resistant, but breathes so condensation doesnt collect. The covers have the hems rolled around the entire perimeter, with a rubberized magnet sewn into each corner. These durable silver-colored protectors are useful around the house, but are sized for woodworkers. | | | Features: | |
• Large Machine Cover protects against rust, harmful moisture, dust, and other workshop elements
• Made of rugged cotton sheeting with a special plastisol
• Fabric roll-hemmed around the entire perimeter
• Rubberized magnet sewn to each corner
• Roll hem with rubberized magnets on each corner
| | | Product Details: | | | Product Length:
| 11.5 inches | | Product Width:
| 9.0 inches | | Product Height:
| 1.75 inches | | Product Weight:
| 1.58 pounds | | Package Length:
| 10.9 inches | | Package Width:
| 8.4 inches | | Package Height:
| 1.5 inches | | Package Weight:
| 1.2 pounds | | Average Customer Rating:
|  based on 13 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 13 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
8 of 8 found the following review helpful:
 I Have All Four SizesJul 19, 2000
By Robert Crouse
This product is tough and durable. I have them on every large power tool and on my chest of tools (Sears Tool Chest). Keeps out dust, dirt, and wettness. I have order this item from Amazon many times. Everything I own for wooding is in my garage, These covers keep the rust out and the tools clear and ready to go at all times.
6 of 6 found the following review helpful:
Wrap that rascal!Jul 19, 2000
By Dr. P. A. Burke
"Crusty Veteran"
Tired of using tarps or plastic sheets that snag on edges and retain moisture? Try one of these covers. They're heavy enough to stay put in a stiff breeze or near a fan, yet soft enough to fold quite easily. The magnets in the corners are a nice feature, as is the non-marring fabric.
6 of 6 found the following review helpful:
 Could be done better for the money...Feb 03, 2002
Hopefully these covers (I've bought a medium and two large) will do the job intended. That is to keep the equipment free of dust and dirt without trapping moisture on the unit whereby rust would form easily. The material is quite light weight (for the cost of these you might expect something heavier) which may tear easily if caught on the machine when you're pulling it off. However, the biggest shortcoming of these covers is the inadequate magnet strips stitched along 3-4 inches of the seam in each corner. These magnets are all but worthless. They are so weak as to not hold the corners of the (light weight) cover up underneath the top of a table saw or jointer. At best, they may hold the cover corners to vertical edges only. At that, a slight breeze will send the cover flapping. My solution is to get rare earth magnets that have a hole in the center and stitch or rivet them on to the corners of the covers. I'm sure these will do the job of holding the cover corners to the equipment. Something the HTC factory stitched-on magnets don't do.
4 of 4 found the following review helpful:
GREAT MACHINE COVERSMar 15, 2005
By J. T. Gonzales
"EMPRESSED"
After years of battling light rust powder due to condensation I have finally found the solution. I have tried every thing from canvas to plastic and rubber covers, all sweat to a degree. I bought a couple of these machine covers and have found that they really work well. I would strongly recommend these machine covers to anyone with a rust problem.
4 of 4 found the following review helpful:
5 Stars 4 SureFeb 16, 2003
Not Big enough for Table Saws as pictured but it covers every thing else..... Jig saws Belt sander's my 18 1/2 Planer etc. Magnet's keep cover in place while I blow down my shop and cover keeps most dust, dirt and dampness of my machine tops......... worth EVERY Penny! Buy several!
See all 13 customer reviews on Amazon.com
| | |
|
