| | |  | Search by Manufacturer | Home » » PSI MMETER2 Digital Readout Moisture Meter | | | | | | | Description: | | This moisture meter has a large digital LCD readout 2-Inch by 1-1/8-Inch to display the moisture content in any wood. It is accurate to +/- 1 Percent and very easy to see. The range is from 0 to 40 Percent. This uses a standard 9 volt battery (included) and has an on/off button to retain battery life when not in use. A low battery symbol appears when the battery needs to be replaced. There is a protective cap to shield the two very sharp probe metering pinsLarge digital display instant readoutAccuracy to 1 PercentMeasurers from 0 to 40 Percent relative moistureConvenient on/off switchAttractive zippered protective case | | | Features: | |
• Large digital display instant readout
• Accuracy to 1 Percent
• Measurers from 0 to 40 Percent relative moisture
• Convenient on/off switch
• Attractive zippered protective case
| | | Product Details: | | | Package Length:
| 5.7 inches | | Package Width:
| 3.8 inches | | Package Height:
| 2.0 inches | | Package Weight:
| 0.45 pounds | | Average Customer Rating:
|  based on 11 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 11 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
5 of 5 found the following review helpful:
 Waste of timeMar 27, 2010
By J. Lazzaro
I figured I would give this a shot since I didn't want to spend a fortune on a moisture meter. Nearly all of the "name brand" moisture meters cost as much or more then the majority of the power tools in my shop. You know, those things with motors, blades, bits, etc? So I got this meter hoping it would just be average and give me semi accurate readings. So much for that. Every reading it gave me never went above 3%. The majority read 1% or 0%, and this is reading woods like poplar, pine, and walnut. When I purchased these woods they were measured to be about at 15% moisture content using a high end moisture meter. Since purchasing they have been sitting in my shop which is humidity controlled to stay at 45% moisture content. With that in mind, I'm fairly sure it is physically impossibly for any of the lumber to reach even 3% without further use of a kiln....much less 0%.
It is of course possible that I got a dud and others are more accurate, but why waste more time trying another meter or 4. I'm going to look into the mini-ligno meters. They appear to be reasonably priced and well reviewed.
5 of 5 found the following review helpful:
Not heavy duty enough for hardwood flooringFeb 05, 2010
By Shawn G. Danaher Jr.
"s1283"
The spurs are too thick to get deep enough into hardwood flooring to get any reading
3 of 3 found the following review helpful:
 Easy Tester for Cord WoodNov 14, 2009
By T. Kraemer
We've started heating our house with wood as a supplement to our regular and steadily more expensive primary heat source. This tester alllows us to objectively rate the wood we get from different suppliers and then reorder from the best. So easy to user, you just touch the probes to the end of a piece of wood and it instantly gives you a percentage moistore content reading. It's also handy to test any wood. An invaluable tool!
3 of 4 found the following review helpful:
JUNK, JUNK, JUNKMar 27, 2010
By M. PITKIN
"Matt"
This item didn't even come close to performing as designed. I tried it on many different kinds on wood and used multiple batteries and got the same results - nothing!. Never buying unseen (or unheard-of) electronics from Amazon again. I should have known better!.
2 of 3 found the following review helpful:
Retired Electronic EngineerAug 11, 2009
By Robert J. Bennett
Works great and I received in a timely manner. I would recommend it to any one who burns or builds with wood. Amazon was great as always.
See all 11 customer reviews on Amazon.com
| | |
|
