| | |  | Search by Manufacturer | Home » » PSI Woodworking CJAWFJ2 Jumbo Flat Jaws | | | | | | | Description: | | These Jumbo Flat Jaws are compatible for all PSI 'C' Style Chucks. The scroll lathe chuck is designed for finishing bowl bottoms. The Jaws open to accommodate an 8-inch bowl. It is easy to adjust sizes with the 4-position peg system. The Jaws are compatible with all the PSI Woodworking 'C' style chucks. Weighs 4 pounds shippedScroll lathe chuck designed for finishing bowl bottomsJaws open to accommodate an 8-inch bowlEasy to adjust sizes with the 4-position peg systemCompatible with all the PSI Woodworking 'C' style chucksWeighs 4 pounds shipped | | | Features: | |
• Scroll lathe chuck designed for finishing bowl bottoms
• Jaws open to accommodate an 8-inch bowl
• Easy to adjust sizes with the 4-position peg system
• Compatible with all the PSI Woodworking 'C' style chucks
• Weighs 4 pounds shipped
| | | Product Details: | | | Product Length:
| 4.0 inches | | Product Width:
| 4.0 inches | | Product Height:
| 1.75 inches | | Package Length:
| 3.9 inches | | Package Width:
| 3.7 inches | | Package Height:
| 1.6 inches | | Package Weight:
| 3.75 pounds | | Average Customer Rating:
|  based on 19 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 19 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
11 of 11 found the following review helpful:
 Nice additionSep 25, 2007
By Eric Francis
"Eric"
It's a nice addition to the Barracuda chuck. It comes with two different height "pins" that you can screw in. My only complaint is that the rubber/plastic covering the pins is a bit hard and not very sticky. I was expecting something a bit softer with more grab. I've only used it a couple of times to try to fix up some out of round bowls and each time, I've had a catch and the bowl goes flying out... Guess I need to work on my technique.
6 of 6 found the following review helpful:
Nice Jaws, could be biggerJun 23, 2009
By Robert Bredlie
The jaws work well within their limits. I have finished the bottoms of several bowls on them and none of them have escaped despite my ham-handedness. My only complaint is that (to me) a jumbo bowl is bigger than 8". 10" would be great, 12" awesome. I am considering looking into making fatter pins to expand the holding size for inside grips.
7 of 8 found the following review helpful:
 PSI CJAWFJ2 Jumbo Flat Jaws DefectJan 23, 2009
By wood master
I never would have thought when buying this product that it would be designed with gaps in the inside and outside diameters of items it can grip. When turning my first hollow cylinder, I found that by moving the threaded pegs from one setting to another that neither setting would hold my project -- one setting slightly too big and the smaller setting slightly too small. This is taking into consideration the maximum adjustment using the Barracuda 2 chuck. The threaded holes in the jaw plates are spaced far enough apart that it creates these gaps.
3 of 3 found the following review helpful:
Holds well, but black rubber can leave marks on lighter woodJan 05, 2009
By B. Meyers
These jaws are built solid and are useful when cleaning up the foot of a bowl. Be careful when turning a bowl's foot to make sure you do not knock the item out since it it only gripped by the rubber feet. I have had the feet slip, causing black marks to be left on light wood.
2 of 2 found the following review helpful:
 Works like it's supposed to at a reasonable price!Dec 05, 2008
By R. Edwards
Bought this set of jaws to use with my Baracuda II chuck for turning the bottoms of bowls. So far it works fine. I also apply a few pieces of masking tape for a little extra safety in holding the bowl. I can't see how a more expensive set of jaws would do the job any better.
See all 19 customer reviews on Amazon.com
| | |
|
