| | |  | Proxxon | Home » » » Proxxon 38472 FBS 115/E Precision Rotary Tool | | | | | | | Description: | | Proxxon has been a respected name in Europe for many years and now their tools are available in a 115V version for the US market. The Precision Grinder is a step up from the typical hardware store rotary tools available today. It has more power, a smaller body and a smoother running motor. It comes with a drill style chuck that is infinitely adjustable from 1/32" to 1/8" or the collet set can be purchased separately. The tool comes complete with 40 accessories as well as a sturdy plastic case. 5,000-20,000 RPM | | | Features: | |
• Comes with 40 accessories and blow mold storage case
• Can be used with Proxxon 28405 angle adapter, number 28606 Proxxon drill stand, 28603 and 28610 Proxxon universal bench clamp holders
| | | Product Details: | | | Package Length:
| 11.6 inches | | Package Width:
| 6.2 inches | | Package Height:
| 2.7 inches | | Package Weight:
| 2.6 pounds | | Average Customer Rating:
|  based on 46 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 46 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
59 of 60 found the following review helpful:
 Very similar to Proxxon Professional modelFeb 14, 2010
By W. A. Wood
I personally own Proxxon 38481 IB/E Professional Rotary Tool. [That model is slightly more expensive--a bit more professional-looking--and it comes with collets instead of a keyless chuck.]
This model, the one I am reviewing, Proxxon 38472 FBS 115/E Precision Rotary Tool, was bought as a gift; however, I couldn't help but take it out and compare it to the Proxxon model that I already own. The two models use the identical motor with the identical analog variable control wheel and so performance is nearly identical. As far as I can tell, the only difference is aesthetics. That, and chucks get worn out over time, increasing play; also, collets are easier to change attachments if they're all the same size... Then again, you can get a new keyless chuck for $10, or you could buy MICROMOT collets for this model for $20.
In short, the hobbyist or tinkerer will notice little difference between this "precision" model and Proxxon's "professional" one.
PS
They are both far superior to anything Dremel makes--and the all-new Dremel 4000 is plastic crap.
29 of 30 found the following review helpful:
A Higher Quality Tool!!Apr 10, 2009
By Amazonbie
I originally bought a Dremel at my local big box store. I opened it and noticed how the plastic and rubber grips were sloppily molded with surfaces that were not smooth where they should have been. I turned it on and found that it would not even begin to spin until I turned the speed control up to about halfway. When it did start spinning, it was not a smooth rotation until I turned it up even more. So I was disappointed with my purchase and decided to look around for alternative brands.
I am very impressed with this Proxxon tool. For only a few dollars more than the Dremel, this tool looks and feels like the parts were produced on a quality mold. Everything has a nice fit and finish. The drive spins smoothly throughout the entire speed range just as I would expect. I am very happy I decided to upgrade to this brand.
24 of 26 found the following review helpful:
Yes u can use the same attachmentsApr 13, 2009
By Eduardo Cerro
After reading the reviews I decided to buy a Proxxon instead of a Dremel,and could not be happier.The price difference is minimal and you can use all of the same attachments.It runs very smooth,the difference was quite noticeable.
9 of 9 found the following review helpful:
Quiet, smooth-running, powerful beyond modelmakingFeb 18, 2010
By arielCo
* The motor is quiet even at 20,000 rpm. The sound reminds me of a small electric mixer - the ones that whir rather than scream.
* Little to no vibration when running idle - absolutely none when drilling. When cutting, it depends on the disk/burr.
* If you're using rpm rating for comparison, consider that that's *idle* speed - when Dremel says a tool goes to 35,000, it means nothing about its behavior under load.
BTW, my first test for my new toy was drilling a 1/8" hole in the metal bracket of a PC add-on card (3/64" thick), and it slid through as soon as I applied a bit of pressure.
9 of 9 found the following review helpful:
Great alternative to a DremelAug 26, 2009
By Daniel Klein
This tool is great! It is very sturdy and reliable. I've used it on stainless steel, terracotta, polystyrene and wood and haven't had any problems. I actually use a Dremel grinding kit with my Proxxon tool and it works perfectly. A lot of dust and debris from materials I've used this on has gotten near or in the vents by the front grip, but it runs like the day I bought it.
See all 46 customer reviews on Amazon.com
| | |
|
