| | |  | Skil | Home » » » Skil 2887-05 18-Volt 2-Speed 3/8-Inch Drill/Driver Kit | | | | | | | Description: | | Includes 18 Volt 2-Speed Cordless 3/8-in Drill/Driver w/ Bit Index - 2887-05, (2) Batteries, 1-Hour Quick Charger, Storage Case | | | Features: | |
• 300 inch/pounds of torque for heavier household fastening applications
• 0-400/1,250 rpm for controlled starts and fast drilling
• 3/8-inch keyless chuck for quick bit changes
• On-tool bit index for easy-access storage
• Fuel gauge indicator for optimal power usage
| | | Product Details: | | | Product Weight:
| 10.78 pounds | | Package Length:
| 15.4 inches | | Package Width:
| 13.7 inches | | Package Height:
| 4.3 inches | | Package Weight:
| 11.85 pounds | | Average Customer Rating:
|  based on 51 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 51 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
71 of 73 found the following review helpful:
 Amazing ValueJan 26, 2004
By Lawsons
I've been using supercheap 18-Volt drills (Power-Craft, Aerotec, etc.) that you can get on other sites for $30. After going through 3 of them, I finally decided to go with a name-brand. The difference in quality is unbelievable, and the price difference isn't that significant when you factor in the extra battery. I'm sure that Skil doen't even compare in quality to Dewalt, Milwalkie, and the other big "professional" names, but those names are twice as much, and for my purposes, this thing is perfect.
71 of 74 found the following review helpful:
 A real workhorseJul 15, 2005
By Bonnerauthor
I have been using this for about six months and have almost retired my 110v drill. With two batteries, I never get a break between jobs and this drill has power to spare. I have been putting up a wooden fence on top of a concrete block wall and this thing outperforms my expensive 110v B&D. After only three 3/8" x 2 1/4" deep holes in the concrete, the AC drill was getting hot. The Skil worked right through without a complaint. The Bosch masonry bit isn't bad either. Additionally, I was drilling 1/2" holes in redwood plate and 1/4" holes in eighth inch metal strap as part of the masonry drilling. When drilling the metal and the bit first pokes through, the drill almost torques out of your hand. I did three battery changes for a day's work. The batteries charge quickly but, as a hint, fully drain the battery before recharging and let it cool off before putting in the charger. This applies to all DC tool batteries. The on-board bit carrier isn't much of a feature but its there if you need it. The drill is lighter than most DC tools costing much more, is well balanced and, at the highest torque setting will drive 3 1/2" screws into studs without maxing the clutch.
EDIT: Five years since I bought this and the tool works fine but the batteries are toast. They won't hold a charge so I'm glad it came with a replacement.
23 of 23 found the following review helpful:
One Flaw to this DrillOct 03, 2008
By dtorge
"dtorge"
For the most part I like this drill. It is comfortable in my hand, has good balance, works great, and with the two batteries, very seldom do I have to wait for a battery to charge. There is one major complaint I have with this drill and it is the design of the battery packs. To change them out is a hassle. After any significant use, and a little bit of dust accumulates on them, they are sometimes quite difficult to remove from the drill. Compared to other stab type drill packs, these are a mojor downside. If you dont use the drill a ton, it is a great drill for the price. If you use it significantly, you may want to consider another drill.
18 of 18 found the following review helpful:
Great performance, amazing valueJun 08, 2007
By Craig Luna
"jikester"
I bought the Skill 2887-03 as part of a combo set including the drill/driver, circular saw, reciprocating saw and jigsaw. Needless to say, I've been extremely pleased.
I put hardwood flooring on three floors (2000+ square feet) and used the set extensively. From cutting plywood for the subfloor and underlayment with the circular saw to making curved cuts in the hardwood with the jigsaw. The drill/driver was used to screw in over a thousand screws to secure the underlayment, drill numerous holes, stir paint, mix mortar for the tile, etc. And with two batteries, you'll be able to have one charging always ready to go. The only corded tools I used for this project were my compound miter and jamb saw. Everything else was done with the cordless Skil combo set.
I was so pleased with the tools, I bought two more sets, one for myself and one for my dad for father's day.
Highly recommended.
19 of 20 found the following review helpful:
This Drill is a Star!Jul 16, 2007
By Audio Bob
I have never owed a Skill product, although I have owned several Black and Decker and Dewalt and no name cordless drills over the past 10 years. They have preformed well but my biggest complaints have been the operation of the keyless chuck and the lack of a second battery (except for big buck models). The chuck invariably (even Jacobs chucks) slips under load ruining the bit or the project. This drill seems to have a no name chuck but it offers a split chuck which allows you to twist one end of the chuck tightly against the other end fully securing the bit. In terms of torque, it has plenty to spare for tough (drilling into green wood) projects and has excellent balance and 'feel/touch' allowing very positive control of speed for spinning screws. Further, the compact size makes it fit into spaces my 19.1 volt could not fit into. I would say, with a charger and second battery and the overall 'feel' of the tool, that this should be a legitimate 150 dollar product. Well done indeed!
See all 51 customer reviews on Amazon.com
| | |
|
